Direkt zu


Veröffentlichungen 2018 – 2011

  1. H. Dubbe, G. Eigenberger, U. Nieken
    Modeling of Conversion Hysteresis Phenomena for Pt/Pd‐based Diesel Oxidation Catalysts
    Chemie Ingenieur Technik, 90: 625-633 (2018) (DOI:10.1002/cite.201700134)

  2. C. Zander, M. Hopp-Hirschler, U. Nieken
    Mesoscopic simulation and characterization of the morphological evolution in phase separating fluid mixtures
    Computational Material Science, 149 (2018) 267–281 (DOI:10.1016/j.commatsci.2018.03.019)

  3. R. Sadeghi, M. S. Shadloo, M. Hopp-Hirschler, A. Hadjadj, U. Nieken
    Three-dimensional lattice Boltzmann simulations of high density ratio two-phase flows in porous media
    Computers and Mathematics with Applications, in press (2018), (DOI: doi.org/10.1016/j.camwa.2017.12.028 )

  4. P. Kunz, S. M. Hassanizadeh, U. Nieken
    A Two-Phase SPH Model for Dynamic Contact Angles Including Fluid–Solid Interactions at the Contact Line
    Transp Porous Med 2018, (DOI: 10.1007/s11242-018-1002-9)

  1. P. Gralka, S. Grottel, J. Staib, K. Schatz, G. K. Karch, M. Hirschler, M. Krone, G. Reina, S. Gumhold, T. Ertl
    2016 IEEE Scientific Visualization Contest Winner: Visual and Structural Analysis of Point-based Simulation Ensembles
    IEEE Computer Graphics & Applications, in press (2017).

  2. J. A. Kerres, H. M. Krieg
    Poly(vinylbenzylchloride) Based Anion-Exchange Blend Membranes (AEBMs): Influence of PEG Additive on Conductivity and Stability
    Membranes 2017, 7, (DOI:10.3390/membranes7020032)

  3. G.A. Giffin, S. Galbiati, M. Walter, K. Aniol, C. Ellwein, J. Kerres and R. Zeis
    Interplay between structure and properties in acid-base blend PBI-based membranes for HT-PEM fuel cells
    J. Memb. Sci. 2017, 535, 122-131, (DOI:10.1016/j.memsci.2017.04.019)

  4. V. Atanasov, A. Oleynikov, J. Xia, S. Lyonnard, J. Kerres
    Phosphonic acid functionalized poly(pentafluorostyrene) as polyelectrolyte membrane for fuel cell application
    J. Power Sources 2017, 337, 137-144, (DOI:10.1016/j.jpowsour.2017.01.085)

  5. M. Breitwieser, C. Klose, A. Hartmann, M. Klingele, J. Erben, H. Cho, J. Kerres, R. Zengerle, S. Thiele
    Simple fabrication of 12 µm thin nanocomposite fuel cell membranes by direct electrospinning and printing
    J. Power Sources 2017, 337, 137-144, (DOI:10.1016/j.jpowsour.2016.10.094)

  6. M. Hirschler, G. Oger, U. Nieken, D. Le Touzé
    Modeling of droplet collisions using Smoothed Particle Hydrodynamics
    International Journal of Multiphase Flow, Volume 95, October 2017, Pages 175-187, (DOI:10.1016/j.ijmultiphaseflow.2017.06.002)

  7. S. Gast, J. H. Matthies, U. S. Tuttlies, U. Nieken
    A novel experimental setup for kinetic studies of toluene oxidation in homogeneous liquid phase
    Chemical Engineering & Technology, 5/2017, (DOI: 10.1002/ceat.201700045)

  8. J. Bickel, B. Odendall, G. Eigenberger, U. Nieken
    Oxygen storage dominated three-way catalyst modeling for fresh catalysts
    Chemical Engineering Science, 160, 34-53, (DOI: 10.1016/j.ces.2016.11.016)

  1. R. Peach, H. M. Krieg, A. J. Krüger, J. J. C. Rossouw, D. Bessarabov, J. Kerres
    Novel cross-linked partially fluorinated and non-fluorinated polyaromatic PBI-containing blend membranes for SO2 electrolysis
    Int. J. Hydrogen Energy 2016, 41(28), 11868-11883 (DOI: 10.1016/j.ijhydene.2016.05.246)

  2. A. Muntean, M. Wagner, J. Meyer, M. Seipenbusch
    Generation of copper, nickel and CuNi alloy nanoparticles by spark discharge
    Journal of Nanoparticle Research (2016), Volume 18, Issue 8, (DOI: 10.1007/s11051-016-3547-2)

  3. E. Hontanon, J. Meyer, M. Blanes, V. Cambra, X. Guo, M. Masuhr, A. Muntean, L. Santos, H. Nirschl, E. Kruis
    A Sustainable Route for Antibacterial Nanofinishing of Textiles
    International Journal of Theoretical and Applied Nanotechnology (2016), Volume 4, Pages 17-27, ISSN: 1929-1248 (DOI: 10.11159/ijtan.2016.003)

  4. P. Kunz, M. Hirschler, M. Huber, U. Nieken
    Inflow/outflow with Dirichlet boundary conditions for pressure in ISPH
    Journal of Computational Physics 326 (2016) 171–187 (DOI: 10.1016/j.jcp.2016.08.046)

  5. W. Säckel and U. Nieken
    Structure Formation within Spray-Dried Droplets; Mathematical Modelling of Spray Polymerisation
    Process-Spray - Functional Particles Produced in Spray Processes, Part I, Pages 89-127, Springer-Verlag, 2016 (ISBN 978-3-319-32368-8)

  6. M. Hirschler, W. Säckel, U. Nieken
    On Maxwell–Stefan diffusion in Smoothed Particle Hydrodynamics
    International Journal of Heat and Mass Transfer, Volume 103, December 2016, Pages 548-554, ISSN 0017-9310 (DOI:10.1016/j.ijheatmasstransfer.2016.07.061)

  7. M. Huber, D. Dobesch, P. Kunz, M. Hirschler, U. Nieken
    Influence of orifice type and wetting properties on bubble formation at bubble column reactors
    Chemical Engineering Science, 2016 (DOI: 10.1016/j.ces.2016.06.002)

  8. H. Dubbe, G. Eigenberger, U. Nieken
    Hysteresis Phenomena on Pt- and Pd-Diesel Oxidation Catalysts: Experimental Observations
    Topics in Catalysis, 2016 (DOI: 10.1007/s11244-016-0589-8)

  9. P. J. Cichon, A. J. Krüger, H. M. Krieg, D. Bessarabov, K. Aniol, J. Kerres
    Sulfonated poly(arylene thioether phosphine oxide)s and poly(arylene ether phosphine oxide)s PBI-blend membranes and their performance in SO2 electrolysis
    Int. J. Hydrogen Energy, 2016 (DOI: 10.1016/j.ijhydene.2015.11.147)

  10. H. Dubbe, F. Bühner , G. Eigenberger, U. Nieken
    Hysteresis Phenomena on Platinum and Palladium-based Diesel Oxidation Catalysts (DOCs)
    Emission Control Science and Technology, 2016 (DOI: 10.1007/s40825-016-0038-y)

  11. R. Kelling, G. Eigenberger, U. Nieken
    Ceramic counterflow reactor for autothermal dry reforming at high temperatures
    Catalysis Today 2016 (doi:10.1016/j.cattod.2016.02.056)

  12. M. Huber, F. Keller, W. Säckel, M. Hirschler, P. Kunz, S.M. Hassanizadeh, U. Nieken
    On the physically based modeling of surface tension and moving contact lines with dynamic contact angles on the continuum scale
    Journal of Computational Physics, 310 (2016) 459–477 (doi:10.1016/j.jcp.2016.01.030)

  13. M. Hirschler, P. Kunz, M. Huber, F. Hahn, U. Nieken
    Open boundary conditions for ISPH and their application to micro-flow
    Journal of Computational Physics, 2016 (doi:10.1016/j.jcp.2015.12.024)

  14. P. Kunz, I. M. Zarikos, N. K. Karadimitriou, M. Huber, U. Nieken, S. M. Hassanizadeh
    Study of Multi-phase Flow in Porous Media: Comparison of SPH Simulations with Micro-model Experiments
    Transport in Porous Media 114(2) (2016) pp 581-600 (DOI: 10.1007/s11242-015-0599-1)

  15. M. N. Ess, M. Bürger, W. Mühlbauer, S. I. Seher
    Untersuchung der Rußreaktivität unterschiedlicher Dieselkraftstoffe
    MTZ - Motortechnische Zeitschrift, 77 (1), January 2016, 70-78 (doi:10.1007/s35146-015-0154-1)

  16. S. I. Seher, M. N. Ess, H. Bladt, R. Niessner, G. Eigenberger, U. Nieken
    A comparison of diesel soot oxidation rates measured with two different isothermal set-ups
    Journal of Aerosol Science Volume 91, January 2016, Pages 94–100 (doi:10.1016/j.jaerosci.2015.10.003)

  17. M. N. Ess, H . Bladt, W. Mühlbauer, S. I. Seher, C. Zöllner, S. Lorenz, D. Brüggemann, U. Nieken, N. P. Ivleva, R. Niessner
    Reactivity and structure of soot generated at varying biofuel content and engine operating parameters
    Combustion and Flame 163, January 2016, 157-169 (doi:10.1016/j.combustflame.2015.09.016)

  1. E. Akgün, A. Muntean, J. Hubbuch, M. Wörner, M. Sangermano
    Cationic Aerosol Photopolymerization
    Macromolecular Materials and Engineering (2015), Volume 300, Issue 2, Pages 136-139, (DOI: 10.1002/mame.201400211)

  2. K. Huang, S. Gast, C. D. Ma, N. L. Abbott, I. Szlufarska
    Comparison between Free and Immobilized Ion Effects on Hydrophobic Interactions: A Molecular Dynamics Study
    Journal of Physical Chemistry B 2015, 119 (41), pp 13152-13159 (DOI: 10.1021/acs.jpcb.5b05220)

  3. C. Morandi, R. Peach, H. M. Krieg, J. Kerres
    Novel morpholinium-functionalized anion-exchange PBI-polymer blends
    J. Mater. Chem. A, 2015, 3, 1110-1120 (DOI: 10.1039/c4tA05026f)

  4. A. Chromik, A. R. dos Santos, T. Turek, U. Kunz, T. Häring, J. Kerres
    Stability of Acid-Excess Acid-Base Blend Membranes in All-Vanadium Redox-Flow Batteries
    J. Memb. Sci. 2015, 476, 148-155 (DOI: 10.1016/j.memsci.2014.11.036)

  5. C. G. Morandi, R. Peach, H. M. Krieg, J. Kerres
    Novel Imidazolium-Functionalized Anion-Exchange Polymer PBI Blend Membranes
    J. Memb. Sci. 2015, 476, 256-263 (DOI: 10.1016/j.memsci.2014.11.049)

  6. V. Atanasov, J. Kerres
    ETFE-g-pentafluorostyrene: functionalization & proton conductivity
    Eur. Polym. J. 2015, 63, 168-176 (DOI: 10.1016/j.eurpolymj.2014.12.017)

  7. A. J. Kruger, P. Cichon, J. Kerres, D. Bessarabov, H. M. Krieg
    Characterisation of a polyaromatic PBI blend membrane for SO2 electrolysis
    Int. J. Hydrogen Energy 2015, 40, 3122-3133 (DOI: 10.1016/j.ijhydene.2014.12.081)

  8. J. Kerres
    Design concepts for aromatic ionomers and ionomer membranes to be applied to fuel cells and electrolysis
    Polymer Reviews 2015, 55, 273-306 (DOI: 10.1080/15583724.2015.1011754)

  9. J. Kerres
    Design concepts for aromatic ionomers and ionomer membranes to be applied to fuel cells and electrolysis
    Polymer Reviews 2015, 55, 273-306 (DOI: 10.1080/15583724.2015.1011754)

  10. F. Mack, K. Aniol, C. Ellwein, J. Kerres and R. Zeis
    Novel Phosphoric Acid-Doped PBI-Blends as Membranes for High-Temperature PEM Fuel Cells
    J. Mater. Chem. A, 2015, 3, 10864-10874 (DOI:10.1039/C5TA01337B)

  11. M. Manolova, C. Schoeberl, R. Freudenberger, C. Ellwein, J. Kerres, S. Stypka, B. Oberschachtsiek
    Development and Testing of an Anion Exchange Membrane Electrolyser
    Int. J. Hydrogen Energy 2015, 40, 11362-11369 (DOI:10.1016/j.ijhydene.2015.04.149)

  12. A. J. Krüger, J. Kerres, D. Bessarabov, H. M. Krieg
    Evaluation of covalently and ionically cross-linked PBI-excess blends for application in SO2 electrolysis
    Int. J. Hydrogen Energy 2015, 40(29), 8788-8796 (DOI:10.1016/j.ijhydene.2015.05.063)

  13. I. Hajdok, V. Atanasov, J. Kerres
    Perfluoro-p-xylene as a new unique monomer for highly stable arylene main-chain ionomers applicable to low-T and high-T fuel cell membranes
    Polymers 2015, 7, 1066-1087 (DOI:10.3390/polym7061066)

  14. J. Kerres, V. Atanasov
    Cross-linked PBI-based high-temperature membranes: stability, conductivity and fuel cell performance
    Int. J. Hydrogen Energy 2015, 40, 14723-14735 (DOI:10.1016/j.ijhydene.2015.08.054)

  15. R. Kelling, H. Dubbe, G. Eigenberger, U. Nieken
    Ceramic Counterflow Reactor for Efficient Conversion of CO2 to Carbon-Rich Syngas
    Chemie Ingenieur Technik, 2015, 87 (6), 726-733 (DOI:10.1002/cite.201400128)

  1. A. Katzfuß, S. Poynton, J. Varcoe, V. Gogel, U. Storr, J. Kerres
    Methylated polybenzimidazole and its application as a blend component in covalently cross-linked anion-exchange membranes for DMFC
    Journal of Membrane Science, 2014, 465, 129-137 (DOI:10.1016/j.memsci.2014.04.004)

  2. R. Kelling, J. Bickel, U. Nieken, P.A. Zegeling
    An adaptive moving grid method for solving convection dominated transport equations in chemical engineering
    Computers & Chemical Engineering, 2014, 71, 467-477 (DOI:10.1016/j.compchemeng.2014.09.011)

  3. B. R. Formisano, C. Bonten, M. Weinert, P. Günther, U. Nieken
    Extrudierte zeolithische Wabenkörper für Sorptionsspeicher
    EuroHeat&Power, 2014, 43 (7-8), 17-19

  4. F. Mack, V. Gogel, L. Jörissen, J. Kerres
    High performance anode based on a partially fluorinated sulfonated polyether for direct methanol fuel cells operating at 130 °C
    Journal of Power Sources, 2014, 255, 223-229 (DOI:10.1016/j.jpowsour.2014.01.029)

  5. M. Krone, M. Huber, K. Scharnowski, M. Hirschler, D. Kauker, G. Reina, U. Nieken, D. Weiskopf, T. Ertl
    Evaluation of Visualizations for Interface Analysis of SPH
    EuroVis 2014 Short Papers 3 (2014).

  6. M. Hirschler, M. Huber, W. Säckel, P. Kunz, U. Nieken
    An Application of the Cahn-Hilliard Approach to Smoothed Particle Hydrodynamics
    Mathematical Problems in Engineering, 2014 (DOI:10.1155/2014/694894)

  7. H. Bladt, W. Mühlbauer, S. Seher, M. Bürger, M. Eß, Ch. Zöllner, R. Nießner, D. Brüggemann, U. Nieken, U. Janoske
    Einfluss der Rußreaktivität auf die DPF-Regeneration
    Informationstagung Motoren, FVV-Frühjahrstagung 2014, Magdeburg

  8. P. Günther, P. Kunz, R. Stierle, G. Eigenberger, U. Nieken
    Prozesssimulation einer Adsorptionskältemaschine: True-Moving-Bed-Approximation
    Chemie Ingenieur Technik, 2014, 86 (1-2), 112-118 (DOI:10.1002/cite.201300073)

  9. I. Hajdok, A. Bona, H.-J. Werner, J. Kerres
    Synthesis and characterization of fluorinated and sulfonated poly(arylene ether-1,3,4-oxadiazole) derivatives and their blend membranes
    European Polymer, 2014, 52, 76-87 (DOI:10.1016/j.eurpolymj.2013.12.003)

  10. W. Säckel, U. Nieken
    Modellierung reaktiver Sprühtrocknungsprozesse am Beispiel der Sprühpolymerisation
    Chemie Ingenieur Technik, 2014, 86 (4), 438-448 (DOI:10.1002/cite.201300148)

  11. J. Kerres, A. Katzfuß, A. Chromik, V. Atanasov
    Sulfonated poly(styrene)s-PBIOO® blend membranes: Thermo-oxidative stability and conductivity
    J. Appl. Polym. Sci., 2014, 131 (4) (DOI:10.1002/app.39889)

  12. R. Peach, H.M. Krieg, A.J. Krüger, D. van der Westhuizen, D. Bessarabov, J. Kerres
    Comparison of ionically and ionical-covalently cross-linked polyaromatic membranes for SO2 electrolysis
    International Journal of Hydrogen Energy, 2014, 39 (1), 28-40 (DOI:10.1016/j.ijhydene.2013.10.023)

  1. D. Chan, K. Hauff, U. Nieken, O. Deutschmann
    Vereinfachte Modellanpassung für gealterte Dieseloxidations- und NOx-Speicherkatalysatoren
    MTZ - Motortechnische Zeitschrift, 2013, 74 (12), 1002-1009 (DOI:10.1007/s35146-013-0296-y)

  2. V. Atanasov, D. Gudat, B. Ruffmann, J. Kerres
    Highly phosphonated polypentafluorostyrene: Characterization and blends with polybenzimidazole
    Eur. Polym. J., 2013, 49 (12), 3977–3985 (DOI:10.1016/j.ssi.2013.06.010)

  3. A. Chromik, J. Kerres
    Degradation studies on acid–base blends for both LT and intermediate T fuel cells
    SSPC-16 Conference Proceedings SSI, 2013, 252, 140–151 (DOI:10.1016/j.ssi.2013.05.017)

  4. V. Atanasov, M. Bürger, S. Lyonnard, L. Porcar, J. Kerres
    Sulfonated poly(pentafluorostyrene): Synthesis & characterization
    SSPC-16 Conference Proceedings, 2013, 252, 75–83 (DOI:10.1016/j.ssi.2013.06.010)

  5. W. Säckel, U. Nieken
    Modelling of Spray Polymerisation Processes
    Macromolecular Symposia, 2013, 333 (1), 297–304 (DOI:10.1002/masy.201300058)

  6. F. Mack, V. Gogel, L. Jörissen, J. Kerres
    Novel anode based on sulfonated polysulfone for medium temperature direct methanol fuel cells
    J. of Power Sources, 2013, 239, 651–658 (DOI:10.1016/j.jpowsour.2012.12.118)

  7. K. Hauff, U. Tuttlies, G. Eigenberger, U. Nieken
    Reaction Kinetics of Aged NOx Storage Catalysts
    Ind. Eng. Chem. Res., 2013, 52 (25), 8399–8409 (DOI:10.1021/ie401241u)

  8. M. Rink, G. Eigenberger, U. Nieken
    Comparison of Two Different Heat-Integrated Exhaust Purification Devices for Monovalent CNG Engines
    Topics in Catalysis, 2013, 56 (1), 421–426 (DOI:10.1007/s11244-013-9990-8)

  9. M. Hirschler, F. Keller, M. Huber, W. Säckel, U. Nieken
    Ein gitterfreies Berechnungsverfahren zur Simulation von Koaleszenz in Mehrphasensystemen
    Chemie Ingenieur Technik, 2013, 85 (7), 1099–1106 (DOI:10.1002/cite.201200211)

  10. K. Hauff, W. Boll, S. Tischer, D. Chan, U. Tuttlies, G. Eigenberger, O. Deutschmann and U. Nieken
    Macro- and Microkinetic Simulation of Diesel Oxidation Catalyst: Effect of Aging, Noble Metal Loading and Platinum Oxidation
    Chemie Ingenieur Technik, 2013, 85 (5), 673–685 (DOI:10.1002/cite.201200158)

  11. M. Rink, G. Eigenberger, U. Nieken
    Heat-Integrated Exhaust Purification for Natural Gas Engines
    Chemie Ingenieur Technik, 2013, 85 (5), 656–663 (DOI:10.1002/cite.201200162)

  12. C. Seyb, J. Kerres
    Novel Partially Fluorinated Sulfonated Poly(arylenethioether)s and Poly(aryleneether)s prepared from Octafluorotoluene and Pentafluoropyridine, and their Blends with PBI-Celazol
    Europ. Poly. J., 2013, 49 (2), 518–531 (DOI:10.1016/j.eurpolymj.2012.11.002)

  13. A. Katzfuß, V. Gogel, L. Jörissen, J. Kerres
    The application of covalently cross-linked BrPPO as AEM in alkaline DMFC
    Journal of Membrane Science, 2013, 425–426, 131–140 (DOI:10.1016/j.memsci.2012.09.022)

  1. W. Säckel, F. Keller, U. Nieken
    Modelling of Single Droplet Drying and Morphology Evolution using Meshfree Simulation Methods
    Proceedings of the 12th International Conference of Liquid Atomisation and Spray Systems, 2.-6. September 2012, Heidelberg

  2. W. Säckel, U. Nieken
    Modellierung der Prozesse in Einzeltropfen bei Sprühtrocknungsprozessen mit Hilfe gitterfreier Simulationsverfahren
    Proceedings des 10. Workshops über Sprays, 21.-22. Mai 2012, Berlin

  3. K. Hauff, H. Dubbe, U. Tuttlies, G. Eigenberger, U. Nieken
    Platinum oxide formation and reduction during NO oxidation on a diesel oxidation catalyst - Macrokinetic simulation
    Applied Catalysis B: Environmental, Volume 129, 2013, pp. 273-281 (DOI: 10.1016/j.apcatb.2012.09.022)

  4. K. Hauff, U. Tuttlies, G. Eigenberger, U. Nieken
    Platinum oxide formation and reduction during NO oxidation on a diesel oxidation catalyst - Experimental results
    Applied Catalysis B: Environmental, Volumes 123–124, 2012, pp. 107-116 (DOI:10.1016/j.apcatb.2012.04.008)

  5. E. Lopez, V. Gepert, A. Gritsch, U. Nieken, G. Eigenberger
    Ethanol steam Reforming thermally coupled with fuel Combustion in a parallel plate reactor
    Ind. Eng. Chem. Res., 2012, 51 (11), 4143-4151 (DOI:10.1021/ie202364y)

  6. S. Dwenger, G. Eigenberger, U. Nieken
    Measurement of Capillary Pressure–Saturation Relationships Under Defined Compression Levels for Gas Diffusion Media of PEM Fuel Cells
    Transport in Porous Media (2012) Volume 91, Number 1, 281-294 (DOI:10.1007/s11242-011-9844-4)

  7. H. Schoeman, H. M. Krieg, A. J. Kruger, A. Chromik, K. Krajinovic, J. Kerres
    H2SO4 stability of PBI-blend membranes for SO2 electrolysis
    International Journal of Hydrogen Energy, 3 (2012), 603-614

  1. R. Kelling, G. Kolios, C. Tellaeche, U. Wegerle, V.M. Zahn, A. Seidel-Morgenstern
    Development of a control concept for catalyst regeneration by coke combustion
    Chemical Engineering Science, Volume 83, 2012, pp. 138-148 (DOI:10.1016/j.ces.2011.11.047)

  2. M. Rink, G. Eigenberger, U. Nieken, U. Tuttlies
    Optimization of a heat-integrated exhaust catalyst for CNG engines
    Catalysis Today, Volume 188, Issue 1, 2012, pp. 113-120 (DOI:10.1016/j.cattod.2011.10.017)

  3. J. Laackmann, W. Säckel, L. Cepelyte, K. Walag, R. Sedelmayer, F. Keller, W. Pauer, H.-U. Moritz
    Experimental Investigation and Numerical Simulation of Spray Processes
    Marcomolecular Symposium 2011, 302, 235-244 (DOI:10.1002/masy.201000091)

  4. A. Katzfuss, K. Krajinovic, A. Chromik, J. Kerres
    Partially Fluorinated Sulfonated Poly(arylene sulfone)s Blended with Polybenzimidazole
    Journal of Polymer Science Part A-Polymer Chemistry 49, No. 8 , 1919-1927 (2011)

  5. K. Krajinovic, T. Kaz, T. Haering, V. Gogel, J. Kerres
    Highly Sulfonated Multiblock-co-Polymers for Direct Methanol Fuel Cells
    Fuel Cells, 2011, im Druck

  6. J. Liao, Q. Li, H. C. Rudbeck, J. O. Jensen, A. Chromik, N. J. Bjerrum, J. Kerres, W. Xing
    Oxidative Degradation of Polybenzimidazole Membranes as Electrolytes for High Temperature Proton Exchange Membrane Fuel Cells
    Fuel Cells, 2011, im Druck

  7. A. Atanasov, J. Kerres
    Highly Phosphonated Polypentafluorostyrene
    Macromolecules, 44 (16), 6416-6423, 2011

↑ Seitenanfang